Rough or textured wall surfaces are rarely the choice of homeowners when giving finishing touches to the interior of their home. In general, the finishing of walls or ceilings is made smooth and slippery by the method of being covered and coated with paint. The texture on the wall does have its drawbacks. Its presence makes the room seem dark because it does not reflect light from one side to the other. However, as the building ages, minor damage to the wall and ceiling surfaces is often found. Starting from cracks, scratches, damp bubbles, to nail holes. To cover up these defects, you can give a little texture to the walls as well as repaint. First of all, prepare a painter and decorator near me paint dough whose concentration is thicker than ordinary paint. This dough can also contain small grains but is still liquid and can be easily applied to walls using a brush. You can make this mixture yourself in a 4: 1 ratio of water.
Prepare the condition of the paint surface by painting the walls using white latex paint. Then let it dry. This initial step is very important because the texture paint that is directly coated on the drywall seeps into the wall. Mix and stir the texture paint until it has the consistency of thick latex paint. Make it as smooth as possible so that it is easy to stick and apply to the wall surface. You can use a regular paint roller or use a special paint roller cover that is used to paint textured surfaces to make this process easier. Let the texture paint half dry, that way you can fix it if the surface looks less than perfect. Test by pressing your thumb into the paint and pulling directly. Make sure the result is a sharp surface like a hedgehog skin. You can repeat the paint coats for nicer texture paint. The more often it is repainted, the thicker the consistency of the wall surface will be. Make sure the paint texture is not too wet or dry. Because if it’s too wet, the grain of the texture can meltdown, while if it’s too dry it can produce a stiff and unnatural-looking texture.